Inverse CO2 /C2 H2 Separation with MFU-4 and Selectivity Reversal via Postsynthetic Ligand Exchange.

Although many porous materials, including metal-organic frameworks (MOFs), have been reported to selectively adsorb C2 H2 in C2 H2 /CO2 separation processes, CO2 -selective sorbents are much less common. Here, we report the remarkable performance of MFU-4 (Zn5 Cl4 (bbta)3 , bbta=benzo-1,2,4,5-bistriazolate) toward inverse CO2 /C2 H2 separation. The MOF facilitates kinetic separation of CO2 from C2 H2 , enabling the generation of high purity C2 H2 (>98 %) with good productivity in dynamic breakthrough experiments. Adsorption kinetics measurements and computational studies show C2 H2 is excluded from MFU-4 by narrow pore windows formed by Zn-Cl groups. Postsynthetic F- /Cl- ligand exchange was used to synthesize an analogue (MFU-4-F) with expanded pore apertures, resulting in equilibrium C2 H2 /CO2 separation with reversed selectivity compared to MFU-4. MFU-4-F also exhibits a remarkably high C2 H2 adsorption capacity (6.7 mmol g-1 ), allowing fuel grade C2 H2 (98 % purity) to be harvested from C2 H2 /CO2 mixtures by room temperature desorption.

Facile immobilization of PNNNP-Pd pincer complexes in MFU-4l-OH and the effects of guest loading on Lewis acid catalytic activity.

A palladium diphosphine pincer complex H3(PNNNP-PdI) has been encapsulated in the benzotriazolate metal-organic framework MFU-4l-OH ([Zn5(OH)4(btdd)3], btdd2- = bis(1,2,3-triazolo)dibenzodioxin), and the resulting materials were investigated as Lewis acid catalysts for cyclization of citronellal to isopulegol. Rapid catalyst immobilization is facilitated by a Brønsted acid-base reaction between the H3(PNNNP-PdI) benzoic acid substituents and Zn-OH groups at the framework nodes. Catalyst loading can be controlled up to a maximum of 0.5 pincer complexes per formula unit [PdI-x, Zn5(OH)4-nx(btdd)3(H3-nPNNNP-PdI)xx = 0.06-0.5, n ≈ 2.75]. Oxidative ligand exchange was used to replace I- with weakly coordinating BF4- anions at the Pd-I sites, generating the activated PdBF4-x catalysts (x = 0.06, 0.10, 0.18, 0.40). The Lewis acid catalytic activity of the PdBF4-x series decreases with increasing catalyst density as a result of the appearance of mass transport limitations. Initial catalytic rates show that the activity of PdBF4-0.06 approaches the intrinsic activity of a homogeneous PNNNP-PdBF4 catalyst analogue. In addition, PdBF4-0.06 exhibits better catalytic activity than the metallolinker-based MOF Zr-PdBF4 and was not subject to leaching or catalyst degradation processes observed for the homogeneous analogue.

Strong CO2 Chemisorption in a Metal-Organic Framework with Proximate Zn-OH Groups.

A novel Zn benzotriazolate metal-organic framework (MOF), [Zn9(OAc)6(bbtm)6] (1, bbtm2- = bis(benzotriazolyl)methanone, OAc- = acetate), has been synthesized and structurally characterized using micro-crystal electron diffraction. The framework contains 12-connected nonanuclear Zn clusters with Zn-OAc groups separated by short intercluster Zn···Zn distances of 6.06 Å. Postsynthetic OAc-/OH- ligand exchange followed by thermal activation generates 1a-OH, which adsorbs CO2 at very low pressures (1.37 mmol/g at 2.5 mbar) and requires an unusually high desorption temperature (>160 °C). Diffuse reflectance IR Fourier transform spectroscopy (DRIFTS) and density functional theory (DFT) calculations have been used to interrogate the CO2 binding mechanism in 1a-OH. The formation of unsymmetric bridging carbonate ligands within the Zn···Zn pockets accompanied by strong hydrogen bonding of the carbonate with a neighboring zinc aqua ligand explains the remarkably strong CO2 affinity of 1a-OH.

Direct NO Reduction by a Biomimetic Iron(II) Pyrazolate MOF.

A novel metal-organic framework (MOF) containing one-dimensional, Fe2+ chains bridged by dipyrazolate linkers and N,N-dimethylformamide (DMF) ligands has been synthesized. The unusual chain-type metal nodes feature accessible coordination sites on adjacent metal centers, resulting in motifs that are reminiscent of the active sites in non-heme diiron enzymes. The MOF facilitates direct reduction of nitric oxide (NO), producing nearly quantitative yields of nitrous oxide (N2 O) and emulating the reactivity of flavodiiron nitric oxide reductases (FNORs). The ferrous form of the MOF can be regenerated via a synthetic cycle involving reduction with cobaltocene (CoCp2 ) followed by reaction with trimethylsilyl triflate (TMSOTf).

Using Postsynthetic X-Type Ligand Exchange to Enhance CO2 Adsorption in Metal-Organic Frameworks with Kuratowski-Type Building Units.

Postsynthetic modification methods have emerged as indispensable tools for tuning the properties and reactivity of metal-organic frameworks (MOFs). In particular, postsynthetic X-type ligand exchange (PXLE) at metal building units has gained increasing attention as a means of immobilizing guest species, modulating the reactivity of framework metal ions, and introducing new functional groups. The reaction of a Zn-OH functionalized analogue of CFA-1 (1-OH, Zn(ZnOH)4(bibta)3, where bibta2- = 5,5'-bibenzotriazolate) with organic substrates containing mildly acidic E-H groups (E = C, O, N) results in the formation of Zn-E species and water as a byproduct. This Brønsted acid-base PXLE reaction is compatible with substrates with pKa(DMSO) values as high as 30 and offers a rapid and convenient means of introducing new functional groups at Kuratwoski-type metal nodes. Gas adsorption and diffuse reflectance infrared Fourier transform spectroscopy experiments reveal that the anilide-exchanged MOFs 1-NHPh0.9 and 1-NHPh2.5 exhibit enhanced low-pressure CO2 adsorption compared to 1-OH as a result of a Zn-NHPh + CO2 ⇌ Zn-O2CNHPh chemisorption mechanism. The MFU-4l analogue 2-NHPh ([Zn5(OH)2.1(NHPh)1.9(btdd)3], where btdd2- = bis(1,2,3-triazolo)dibenzodioxin), shows a similar improvement in CO2 adsorption in comparison to the parent MOF containing only Zn-OH groups.

Postsynthetic Metal Exchange in a Metal-Organic Framework Assembled from Co(III) Diphosphine Pincer Complexes.

A Zr metal-organic framework (MOF) 1-CoCl3 has been synthesized by solvothermal reaction of ZrCl4 with a carboxylic acid-functionalized CoIII-PNNNP pincer complex H4(L-CoCl3) ([L-CoCl3]4- = [(2,6-(NHPAr2)2C6H3)CoCl3]4-, Ar = p-C6H4CO2-). The structure of 1-CoCl3 has been determined by X-ray powder diffraction and exhibits a csq topology that differs from previously reported ftw-net Zr MOFs assembled from related PdII- and PtII-PNNNP pincer complexes. The Co-PNNNP pincer species readily demetallate upon reduction of CoIII to CoII, allowing for transmetalation with late second and third row transition metals in both the homogeneous complex and 1-CoCl3. Reaction of 1-CoCl3 with [Rh(nbd)Cl]2 (nbd = 2,5-nobornadiene) results in complete Rh/Co metal exchange at the supported diphosphine pincer complexes to generate 1-RhCl, which has been inaccessible by direct solvothermal synthesis. Treating 1-CoCl3 with PtCl2(SMe2)2 in the presence of the mild reductant NEt3 resulted in nearly complete Co substitution by Pt. In addition, a mixed metal pincer MOF, 1-PtRh, was generated by sequential substitution of Co with Pt followed by Rh.

Unveiling reactive metal sites in a Pd pincer MOF: insights into Lewis acid and pore selective catalysis.

A porous Zr metal-organic framework, 1-PdBF4 [Zr6O4(OH)4(OAc)2.4{(PNNNP)Pd(MeCN)}2.4(BF4)2.4; PNNNP = 2,6-(HNPAr2)2C5H3N; Ar = p-C6H4CO2-], has been synthesized via postsynthetic oxidative I-/BF4- ligand exchange using NOBF4. 1-PdBF4 enjoys markedly superior catalytic activity and recyclability to its trifluoracetate-exchanged analogue, 1-PdTFA, for the intramolecular cyclization of o-alkynyl anilines and the carbonyl-ene cyclization of citronellal. Moreover, 1-PdBF4 demonstrates a rare example of pore selective catalysis for the cyclization of 2-ethynyl aniline.

Bioinspired Metal-Organic Framework for Trace CO2 Capture.

A Zn benzotriazolate metal-organic framework (MOF), [Zn(ZnO2CCH3)4(bibta)3] (1, bibta2- = 5,5'-bibenzotriazolate), has been subjected to a mild CH3CO2-/HCO3- ligand exchange procedure followed by thermal activation to generate nucleophilic Zn-OH groups that resemble the active site of α-carbonic anhydrase. The postsynthetically modified MOF, [Zn(ZnOH)4(bibta)3] (2*), exhibits excellent performance for trace CO2 capture and can be regenerated at mild temperatures. IR spectroscopic data and density functional theory (DFT) calculations reveal that intercluster hydrogen bonding interactions augment a Zn-OH/Zn-O2COH fixation mechanism.

Zirconium Metal-Organic Frameworks Assembled from Pd and Pt PNNNP Pincer Complexes: Synthesis, Postsynthetic Modification, and Lewis Acid Catalysis.

Carboxylic acid-functionalized Pd and Pt PNNNP pincer complexes were used for the assembly of two porous Zr metal-organic frameworks (MOFs), 2-PdX and 2-PtX. Powder X-ray diffraction analysis shows that the new MOFs adopt cubic framework structures similar to the previously reported Zr6O4(OH)4[(POCOP)PdX]3, [POCOP = 2,6-(OPAr2)2C6H3); Ar = p-C6H4CO2-, X = Cl-, I-] (1-PdX). Elemental analysis and spectroscopic characterization indicate the presence of missing linker defects, and 2-PdX and 2-PtX were formulated as Zr6O4(OH)4(OAc)2.4[M(PNNNP)X]2.4 [M = Pd, Pt; PNNNP = 2,6-(HNPAr2)2C5H3N; Ar = p-C6H4CO2-; X = Cl-, I-]. Postsynthetic halide ligand exchange reactions were carried out by treating 2-PdX with Ag(O3SCF3) or NaI followed by PhI(O2CCF3)2. The latter strategy proved to be more effective at activating the MOF for the catalytic intramolecular hydroamination of an o-substituted alkynyl aniline, underscoring the advantage of using halide exchange reagents that produce soluble byproducts.

Electrochemical and structural investigation of the interactions between naphthalene diimides and metal cations.

The effects of Li+ and Mg2+ on the electrochemical behaviour and photoreduction of N,N'-bis(2,6-diisopropylphenyl)naphthalene diimide (Dipp2NDI) have been investigated using cyclic voltammetry and UV-vis spectroscopy. Strong cation-anion interactions between Li+ or Mg2+ and [Dipp2NDI]2- result in solvent-dependent anodic shifts of the NDI˙-/2- redox couple. In organic solvents of moderate dielectric constant and donor ability, the two, one-electron redox processes typically observed for Dipp2NDI merge into a single, two-electron process. This strong metal cation effect has been leveraged for the photoreduction of Dipp2NDI to [Dipp2NDI]2-via a disproportionation process. Chemical reduction of Dipp2NDI with iPrMgCl has allowed the isolation of Mg2+ complexes of [Dipp2NDI]2-. Single crystal X-ray diffraction was used to determine the structure of a dimeric complex, [(Dipp2NDI)Mg2(THF)3]2, that features strong coordination of Mg2+ by the oxygen atoms of the reduced NDI.

On the coordination non-innocence of antimony in nickel(ii) complexes of the tetradentate (o-(Ph2P)C6H4)3Sb ligand.

In a continuation of our investigations into the unusual properties of antimony-based ligands, we have decided to investigate the structure of the complexes formed by the tetradentate ligands (o-(Ph2P)C6H4)3E (E = P (1), As (2), Sb (3)) with NiCl2. We observed that the structure of the resulting complexes depends on the nature of the central pnictogen atom E, with the phosphorus- and arsenic-based systems adopting ionic structures of the type [ClNi(o-(Ph2P)C6H4)3E][Cl] (E = P ([4][Cl]), As ([5][Cl])) while the known antimony complex ClNi(o-(Ph2P)C6H4)3SbCl (6-Cl) is molecular, with a chloride anion bound to the antimony atom trans from the nickel atom. Using both structural and computational arguments, we propose that the Lewis acidic behavior of the antimony atom in the cation [ClNi(o-(Ph2P)C6H4)3Sb]+ ([6]+) which as been structurally characterized as its [BPh4]- salt, originates in part from the steric compression imposed by the rigid ligand buttresses and the larger size of antimony. This steric compression pushes the antimony atom of [6]+ toward a geometry that is closer to that of a trigonal-base pyramid, setting the stage for the coordination of a ligand trans from the nickel atom as in 6-Cl. Coordination of the chloride ligand also benefits from an accumulation of positive character at the antimony atom of [6]+ which is a assigned to the polarizable and electron-releasing nature of this heavy pnictogen.

Improved Catalytic Activity and Stability of a Palladium Pincer Complex by Incorporation into a Metal-Organic Framework.

A porous metal-organic framework Zr6O4(OH)4(L-PdX)3 (1-X) has been constructed from Pd diphosphinite pincer complexes ([L-PdX](4-) = [(2,6-(OPAr2)2C6H3)PdX](4-), Ar = p-C6H4CO2(-), X = Cl, I). Reaction of 1-X with PhI(O2CCF3)2 facilitates I(-)/CF3CO2(-) ligand exchange to generate 1-TFA and I2 as a soluble byproduct. 1-TFA is an active and recyclable catalyst for transfer hydrogenation of benzaldehydes using formic acid as a hydrogen source. In contrast, the homogeneous analogue (t)Bu(L-PdTFA) is an ineffective catalyst owing to decomposition under the catalytic conditions, highlighting the beneficial effects of immobilization.

Redox and anion exchange chemistry of a stibine-nickel complex: writing the L, X, Z ligand alphabet with a single element.

According to the covalent bond classification (CBC) method, two-electron donors are defined as L-type ligands, one-electron donors as X-type ligands, and two-electron acceptors as Z-type ligands. These three ligand functions are usually associated to the nature of the ligating atom, with phosphine, alkyl, and borane groups being prototypical examples of L-, X- and Z-ligands, respectively. A new SbNi platform is reported in which the ligating Sb atom can assume all three CBC ligand functions. Using both experimental and computational data, it is shown that PhICl2 oxidation of (o-(Ph2P)C6H4)3SbNi(PPh3) (1) into [(o-(Ph2P)C6H4)3ClSb]NiCl (2) is accompanied by a conversion of the stibine L-type ligand of 1 into a stiboranyl X-type ligand in 2. Furthermore, the reaction of 2 with the catecholate dianion in the presence of cyclohexyl isocyanide results in the formation of [(o-(Ph2P)C6H4)3(o-O2C6H4Sb)]Ni(CNCy) (4), a complex featuring a nickel atom coordinated by a Lewis acidic, Z-type, stiborane ligand.

High electrical conductivity in Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2, a semiconducting metal-organic graphene analogue.

Reaction of 2,3,6,7,10,11-hexaaminotriphenylene with Ni(2+) in aqueous NH3 solution under aerobic conditions produces Ni3(HITP)2 (HITP = 2,3,6,7,10,11-hexaiminotriphenylene), a new two-dimensional metal-organic framework (MOF). The new material can be isolated as a highly conductive black powder or dark blue-violet films. Two-probe and van der Pauw electrical measurements reveal bulk (pellet) and surface (film) conductivity values of 2 and 40 S·cm(-1), respectively, both records for MOFs and among the best for any coordination polymer.

Investigation of the synthesis, activation, and isosteric heats of CO2 adsorption of the isostructural series of metal-organic frameworks M3(BTC)2 (M = Cr, Fe, Ni, Cu, Mo, Ru).

The synthesis, activation, and heats of CO(2) adsorption for the known members of the M(3)(BTC)(2) (HKUST-1) isostructural series (M = Cr, Fe, Ni, Zn, Ni, Cu, Mo) were investigated to gain insight into the impact of CO(2)-metal interactions for CO(2) storage/separation applications. With the use of modified syntheses and activation procedures, improved BET surface areas were obtained for M = Ni, Mo, and Ru. The zero-coverage isosteric heats of CO(2) adsorption were measured for the Cu, Cr, Ni, Mo, and Ru analogues and gave values consistent with those reported for MOFs containing coordinatively unsaturated metal sites, but lower than for amine functionalized materials. Notably, the Ni and Ru congeners exhibited the highest CO(2) affinities in the studied series. These behaviors were attributed to the presence of residual guest molecules in the case of Ni(3)(BTC)(2)(Me(2)NH)(2)(H(2)O) and the increased charge of the dimetal secondary building unit in [Ru(3)(BTC)(2)][BTC](0.5).

Sensing of aqueous fluoride anions by cationic stibine-palladium complexes.

Turn on the lantern! The stibine donor ligand of a cationic palladium complex acts as a Lewis acid and reacts with a fluoride anion to afford the corresponding fluorostiboranyl-palladium species (see scheme). Bindung of the fluoride anion to the antimony center induces a change in denticity of the triphosphine unit and leads to a bright-orange trigonal-bipyramidal d(8) lantern complex.

Synthesis, structure, and properties of a T-shaped 14-electron stiboranyl-gold complex.

A cyclic stiboranyl-gold complex (1) supported by two 1,8-naphthalenediyl linkers has been synthesized and structurally characterized. The gold atom of this complex adopts a T-shaped geometry and is separated from the antimony center by only 2.76 Å. Surprisingly, the trivalent gold atom of this complex is involved in an aurophilic interaction, a phenomenon typically only observed for monovalent gold complexes. This phenomenon indicates that the stiboranyl ligand possesses strong σ-donating properties making the trivalent gold atom of 1 electron rich. This view is supported by DFT calculations as well as Au L(3)- and Sb K-edge XANES spectra which reveal that 1 may also be described as an aurate-stibonium derivative. In agreement with this view, complex 1 shows no reactivity toward the halides Cl(-), Br(-), and I(-). It does, however, rapidly react with F(-) to form an unprecedented anionic aurate fluorostiborane complex ([2](-)) which has been isolated as the tetra-n-butylammonium salt. The increased coordination number of the antimony center in this anionic complex ([2](-)) does not notably affect the Au-Sb separation (2.77 Å) or the geometry at the gold atom which remains T-shaped.

Stabilization of zwitterionic aryltrifluoroborates against hydrolysis.

The presence of a proximal cationic group in zwitterionic aryltrifluoroborates such as o-(Ph(2)MeP)C(6)H(4)(BF(3)) stabilizes these compounds against hydrolysis.